SMALL-Ex® Level Measuring diff. pressure

SMALL-N_RG_fl_D_H
SMALL-N_RG_fl_dspl_H

This specialized level measuring device has been developed especially for the use in pressurized tanks. Two pressure sensors separately monitor the level and the internal pressure of the tank ensuring an exact measurement independent of the internal pressure that may be inside of the tank up to a maximum of 1 bar.
A pressure sensor is installed at the top of the device and evaluates the level of liquid in the tank. On tanks that have an internal pressure fluctuations (e.g., poor ventilation or fluid back flow), over-pressurization may take place that will affect the measurement.. To compensate for this, a second pressure sensor monitors the internal tank air pressure and calculates this internally.  The internal communication through the data BUS calculates both measured values and a precise measuring result, independent of the surrounding pressure is transferred to the device.

Using this measuring method, it is possible to achieve precise measurements under heavy duty operation. Susceptible mechanics are excluded.

Marking:



Certifications:

 

 

 

Env. Tempemperature:
 

Housing Material:

Gauge Accuracy:

Medium

Illuminated Display:

Display:

Output Signal:




Nominal Voltage:
 

I Ex ia I Ma
Ex ia I Ma
PO Ex ia I Ma X

BVS 06 ATEX E005 X
IECEx BVS 09.0056X
IECEx TSA 13.0023X
MSHA 18-ISA 150004-0
TC RU C-DE.MЮ62.B.03774
MA J2012330, J2012329

-50 to +100 °C bei Gruppe I
-50 to +80 °C bei Gruppe II

Stainless Steel

+/- 0,5% from end-value (higher accuracy on request)

fluid medium, e.g. water, emulsion, oil

optional

mm; m; %; ft (other units on reauest)

5 - 15Hz
0/4 - 20mA
* - **V (max. 10 V DC, at min. 7,5V power supply)
CAN-Bus

12V DC (7,5 – 14,0 V DC) 3-wiring technology
16V DC (9,6 – 16,1 V DC) 3-wiring technology
24V DC (14 – 26,6 V DC) 2-wiring technology
 

 

 

 

deutsch1
polish2