SMALL-Ex® Inclinometer


The Inclinometer from the SMALL-Ex series is an instrument around the inclination angle e.g. On machines. It was designed to be used on mining machines such as cut-cut machines, roller loaders, drilling trucks, continuous miners and others. Due to the appropriate material use (stainless steel), it has been very robust and developed for extreme use on mining machines.
As an option, the device can be equipped with one illuminated display per movement axis.
This SMALL-Ex series device is also available with a wide variety of connectors, a specific measuring range and different output signals. Should you prefer a special plug, we will gladly check the usability.

The measuring instrument is optionally equipped with a 1- or 2-axis measurement and can be operated up to max. +/- 70 measurements with a resolution of 0.1 °.






Env. Tempemperature:

Housing Material:

Gauge Accuracy:

Illuminated Display:


Output Signal:

Nominal Voltage:

I Ex ia I Ma
Ex ia I Ma
PO Ex ia I Ma X

BVS 06 ATEX E005 X
IECEx BVS 09.0056X
IECEx TSA 13.0023X
MSHA 18-ISA 150004-0
TC RU C-DE.MЮ62.B.03774
MA J2012330, J2012329

-50 to +100 °C bei Gruppe I
-50 to +80 °C bei Gruppe II

Stainless Steel

+/- 0.1° from end-value (higher accuracy on request)


° ; %(other units on reauest)

5 - 15Hz
0/4 - 20mA
* - **V (max. 10 V DC, at min. 7,5V power supply)

12V DC (7,5 – 14,0 V DC) 3-wiring technology
16V DC (9,6 – 16,1 V DC) 3-wiring technology
24V DC (14 – 26,6 V DC) 2-wiring technology